LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 305

Page: 305 / 512

ipLDK-60

Issue 2.0

Admin Programming Manual

July, 2010

3.2.4

Station Attributes III (PGM 113)

PGM 113 is one of four (4) program groups that assign general attributes to the station range. Also, see PGMs 111, 112, and 114.

Procedure:

1. Press

the

[TRANS/PGM]

button.

2. Dial

113.

3. Enter the appropriate Station Range.

4. Select the desired Flexible button from the chart below.

5. Enter the appropriate value.

6. Press

the

[Hold/Save]

button.

PGM

113

Flex

Btn

Description

Default

Values

Admin access

(DKTU Only)

When enabled, the station is permitted access to System Admin. The station must

be a DKTU and a 24-button phone is recommended.

1 (Enable at Atd)

0 (Disable at

other stations

0 = Disable

1 = Enable

VMIB Access

When enabled, the station user can access the VMIB and the user is assigned a

VMIB Voice Mailbox.

1 (Enable)

0 = Disable

1 = Enable

Group Listening

When enabled, pressing the [On/Off] button of the station while on a handset call

activates the speaker so others in the vicinity hear the voice of the connected user.

Only the handset microphone is active.

1 (Enable)

0 = Disable

1 = Enable

Override

Privilege

When enabled, the station user is allowed to signal a station on a CO line call.

0 (Disable)

0 = Disable

1 = Enable

SMDR Hidden

Dialed Digits

When enabled, digits dialed by the station user are NOT output in SMDR records.

0 (Disable)

0 = Disable

1 = Enable

Voice Over

When enabled, the busy Station can talk alternately between two calling or called

0 (Disable)

0 = Disable

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Search results

Summary of Contents for ipldk-60

Reviews:

Brands by name

Popular brands