manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 49

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

41 

 

3.12  Memory Dialing 

3.12.1 

Auto Call Number Redial (ACNR) 

Description 

If a CO line call destination is busy or no-answer, the number can be redialed automatically 
using ACNR.    The system will retry the number based on the assigned ACNR Retry counter, 
default is three (3) attempts. 
 

Operation 

To use ACNR while receiving a busy/no-answer indication on a CO line call, 

1.  Press the [REDIAL] button or ACNR softkey. 
2.  Replace the handset or go on-hook. 
3.  The system will automatically retry the call at programmed intervals. 
4.  When the called party answers, lift handset. 

 
To cancel ACNR, perform the following Steps: 

1.  Press the flashing [REDIAL] button or Stop softkey. 
OR 
2.  Lift the handset or press the [Speaker] button during an ACNR call attempt. 

 

Consideration 

  ACNR is only available to DKTs with a [REDIAL] button or ACNR softkey.    Use code ‘97’ 

to assign the Redial feature to a Flexible button 

  Analog CO Lines must provide call progress tones so the system can detect the status of 

the CO line during the ACNR attempt. 

  If the originally used CO line used to place the call is busy, an ACNR call is placed on a 

CO line from the same group.  If no line is available, the system will restart the call 
attempt after the ACNR delay time without incrementing the ACNR Retry Counter. 

 

Reference 

A.  Flexible Button Assignment 

 

Admin Programming 

Override 1st CO Line Group (PGM 161, Flexible button 3) 
 

Allows search of all CO Groups for an available CO line 

ACNR Pause Timer (PGM 180, Flexible button 10) 
 

Sets the time between ACNR call attempts and delay if all CO lines are busy 

ACNR Delay Timer (PGM 180, Flexible button 8) 
 

Sets the delay time to restart if the station is busy 

ACNR Tone Detect Timer (PGM 180, Flexible button 13) 
 

Sets analog CO line call progress tone detection time 

ACNR No Answer Timer (PGM 180, Flexible button 9), 
 

Duration the system will await answer before terminating an ACNR call attempt 

ACNR Retry Counter (PGM 180, Flexible button 11) 
 

Defines the number of times ACNR is attempted before it is automatically cancelled 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands