manualshive.com logo in svg

LG-Ericsson ipldk-60, Feature Description And Operation Manual

Share
Download
LG-Ericsson ipldk-60 Feature Description And Operation Manual Download Page 198

 
 

Issue 2.2 

Feature Description and Operation Manual 

 

 

 

 

 

 

190 

 

13.4  Attendant Intrusion 

Description 

When an Attendant calls a busy Station, the attendant can intrude upon the conversation and 
can hear, and will be heard by both parties in the conversation.    A tone is available to notify 
the parties of the intrusion. 
 

Operation 

To intrude on call from the Attendant while receiving busy on an intercom call, 

1.  Press Attendant Intrusion Flexible button. 
2.  After intrusion tone, conversation is possible with the station and connected party. 

 
To assign an Attendant Intrusion Flexible button, 

1. Press 

[TRANS/PGM]. 

2.  Press the Flexible button to be assigned 
3.  Press the [TRANS/PGM]

 

button 

4.  Dial ‘8 6’ 
5.  Press the [HOLD/SAVE]

 

button. 

 

Consideration 

  The Attendant must have an Attendant Intrusion Flexible button assigned to activate 

intrusion. 

  Auto Privacy must be disabled and the Attendant must have Override privilege for proper 

operation. 

 

Admin Programming 

Override Privilege (PGM 113, Flexible button 4) 
 

Assigns Override privilege to the Station 

Auto Privacy (PGM161, Flexible button 5) 
 Disables 

Privacy 

Privacy Warning Tone (PGM 161, Flexible button 6) 
 

Enables a warning tone to indicate another Station is intruding on the call. 

Intercom Tenancy Group Attendant (PGM 120, Flexible button 1) 
 

Assigns Attendant Station for the Tenancy group 

Attendant Assignment (PGM 164) 
 

Assigns System and Main Attendants 

 
 

Summary of Contents for ipldk-60

































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands