ipLDK-60
Issue 2.0
Admin Programming Manual
July, 2010
52
PGM
127
Flex
Btn
Description
Default
Values
VMON CO Grp
6
When Outbound Notification is enabled, the CO Line group to use to place the
outbound notification call can be configured.
01
01 ~ 24
VMON
Telephone
Number
7
When Outbound Notification is enabled, the telephone number to call must be
assigned.
24
digits
VMON Retry
Count
8
Should the notification fail (error, busy, or no-answer) the system will retry the
outbound call up to 9 times. After the assigned number of attempts, the system
abandons the notification.
2
1 ~ 9
VMON Retry
Interval
9
Should the notification fail, the system will attempt the call again after the “VMON
Retry Interval” time.
10 seconds
01 ~ 60 seconds
Cascade
Destination
10
The system can send a copy of a received voice mail to another Voice mailbox.
Flexible button 1 = Station
Flexible Button 2 = Voice Mailbox number
Button 1 – Station
Number
Button 2 – Voice
Mailbox Number
Cascade Type
11
The system will send a copy of a new message under one of several conditions as
assigned here.
0 (no cascade)
0 – No Cascade
1 – Immediate
2 - Notify Failure
3 – Urgent
Email Notification
12
The system can be configured to send an e-mail to the user as notification of a new
voice message.
0 (Off)
0 = Off
1 = On
Authorization
Code (Password)
13
Access to a Voice Mailbox can be password protected, when the user enters the
mailbox, the system will request entry of the password.
Station Number
11 digits
SMTP Server
14
When e-mail notification is on, the SMTP (Simple Mail Transfer Protocol) server IP
address must be configured.
IPv4
Address
Email Address
15
When e-mail notification is enabled, the e-mail address to notify must be configured.
24
Characters
Summary of Contents for ipldk-60
