Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 107 / 774

■
AAL5 Interface operational status—Operational status of the AAL5 interface:
up, down, lowerlayerDown
■
time since last status change—Time since last reported change to the AAL5
interface operational status
■
SNMP trap link-status—Whether SNMP link status traps are enabled or
disabled on the ATM AAL5 interface
■
Auto configure ATM 1483 status—Setting of the autoconfiguration feature
for a dynamic ATM 1483 subinterface configured over the ATM AAL5
interface:
■
enabled—Autodetection of the ATM 1483 dynamic encapsulation type
is enabled on the ATM AAL5 interface
■
disabled—Autodetection of the ATM 1483 dynamic encapsulation type
is not currently enabled on the ATM AAL5 interface
■
InPackets—Number of packets received on this interface
■
InBytes—Number of bytes received on this interface
■
OutPackets—Number of packets transmitted on this interface
■
OutBytes—Number of bytes transmitted on this interface
■
InErrors—Number of incoming errors received on this interface
■
OutErrors—Number of outgoing errors on this interface
■
InPacketDiscards—Number of incoming packets discarded on this interface
■
OutDiscards—Number of outgoing packets discarded on this interface
■
Example
host1# show atm aal5 interface atm 3/0
AAL5 Interface ATM 3/0 operational status: lowerLayerDown
time since last status change: 00:08:46
SNMP trap link-status: disabled
Auto configure ATM 1483 status: disabled
InPackets: 0
InBytes: 0
OutPackets: 0
OutBytes: 0
InErrors: 0
OutErrors: 0
InPacketDiscards: 0
OutDiscards: 0
■
See show atm aal5 interface.
show atm atm1483
Use to display whether or not the router is set up to export ATM 1483 subinterface
descriptions to the line module.
■
Monitoring ATM
■ 75
Chapter 1: Configuring ATM