Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 290 / 774

Table 13: show ethernet oam lfm status Output Fields (continued)
Field Description Field Name
Lowest value for frame error events in number of frames, which
when exceeded causes an Errored Frame Event TLV to be sent
to the peer Low threshold
Highest value for frame error events in number of frames, which
when exceeded causes an action to be triggered High threshold
Displays a detailed classification of symbol errors event TLVs
since the OAM sublayer was reset Symbol-errors Error Monitor
Specified amount of time in seconds during which symbol error
events are counted Window
Lowest value for frame second error events in number of error
symbols, which when exceeded causes an Error Symbol Period
TLV to be sent to the peer Low threshold
Highest value for symbol error events in number of error symbols,
which when exceeded causes an action to be triggered High threshold
Displays details on the non-OAM PDUs that are sent and received
when the interface is in remote loopback mode Remote-loopback
Number of frames sent to the remote peer that are transmitted
back or looped to the local interface Frames sent
Number of bytes sent to the remote peer that are transmitted
back or looped to the local interface Bytes sent
Number of frames received from the remote peer when the local
entity is in loopback mode Frames received
Number of bytes received from the remote peer when the local
entity is in loopback mode Bytes received
Related Topics
Configuring 802.3ah OAM Link-Fault Management on page 242
■
■
show ethernet oam lfm status
Monitoring OAM Link-Fault Management Sessions on All Configured Interfaces
Purpose
Display a summary of the MAC-layer OAM status of all Ethernet links on which OAM
link-fault management is enabled. This command displays the state of each of the
links, with a brief synopsis about the OAM configurations of each of the links, such
as the discovery mode of the OAM entity, state of the discovery mechanism, MAC
address of the remote peer, the Link Flag details that contain information about the
interface, and loopback configuration.
258 ■
Monitoring OAM Link-Fault Management Sessions on All Configured Interfaces
JUNOSe 11.1.x Link Layer Configuration Guide