Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 95 / 774

■
You must issue the exit command from ATM VC Class Configuration mode for
the configuration to take effect.
■
Example
host1(config-vc-class)# ubr 5000
host1(config-vc-class)# exit
■
Use the no version to restore the default service category, UBR without a PCR.
■
See ubr.
vbr-nrt
■
Use to configure the VBR-NRT service category on an ATM data PVC.
■
For detailed information about how to use this command, see “vbr-nrt” on
page 49.
■
You must issue the exit command from ATM VC Class Configuration mode for
the configuration to take effect.
■
Example
host1(config-vc-class)# vbr-nrt 50000 10000 150
host1(config-vc-class)# exit
■
Use the no version to restore the default service category, UBR without a PCR.
■
See vbr-nrt.
vbr-rt
■
Use to configure the VBR-RT service category on an ATM data PVC.
■
For detailed information about how to use this command, see “vbr-rt” on page 50.
■
You must issue the exit command from ATM VC Class Configuration mode for
the configuration to take effect.
■
Example
host1(config-vc-class)# vbr-rt 200000 30000 400
host1(config-vc-class)# exit
■
Use the no version to restore the default service category, UBR without a PCR.
■
See vbr-rt.
vc-class atm
■
Use to create and name a VC class for an ATM data PVC.
■
You must specific a VC class name of up to 32 alphanumeric characters.
■
The vc-class atm command accesses ATM VC Class Configuration mode, from
which you can configure a set of attributes for the PVC including the service
category, encapsulation method, F5 OAM options, and Inverse ARP.
■
You must issue the exit command from ATM VC Class Configuration mode for
the VC class configuration to take effect.
Configuring ATM VC Classes
■ 63
Chapter 1: Configuring ATM