Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 670 / 774

1.
(Optional) Configure profiles containing characteristics for the dynamic
upper-interface encapsulation types to be created over the dynamic ATM 1483
subinterface.
These profiles are referenced in the base profile for the dynamic ATM subinterface
as nested profile assignments. For detailed instructions on creating profiles, see
“Configuring a Dynamic Interface from a Profile” on page 563 in “Configuring
Dynamic Interfaces” on page 515.
2.
Create the base profile for the dynamic ATM 1483 subinterface by assigning the
profile a name.
host1(config)# profile atm1483BaseProfile
This command accesses Profile Configuration mode, which enables you to
configure attributes in the base profile.
3.
Define attributes for the ATM 1483 subinterface in the base profile.
a. Apply traffic-shaping parameters to the VC range on the ATM AAL5 interface.
b. Configure the ATM 1483 subinterface for autodetection of the PPP
upper-interface encapsulation type.
c. Configure the ATM 1483 subinterface for autodetection of the IP
upper-interface encapsulation type using a nondefault lockout time range of
3600–7200 seconds (1–2 hours).
d. Configure a subscriber for the IP upper-interface encapsulation type.
e. Configure a description for ATM 1483 subinterfaces that are created with
this base profile.
f. Set an advisory speed for ATM subinterfaces that are created with this base
profile.
g. Assign a VC class to the bulk-configured VC ranges created on the dynamic
ATM 1483 subinterfaces associated with this base profile. You must issue
the
exit command from Profile Configuration mode for the VC class
association to take effect.
host1(config-profile)# atm pvc aal5autoconfig cbr 10000
host1(config-profile)# atm atm1483 auto-configure ppp
host1(config-profile)# atm atm1483 auto-configure ip lockout-time 3600
7200
host1(config-profile)# atm atm1483 subscriber ip user-prefix joesmith
domain myisp password-prefix abc123
host1(config-profile)# atm atm1483 description VC_atm1
host1(config-profile)# atm atm1483 advisory-rx-speed 2000
host1(config-profile)# atm class-vc premium-subscriber-class
host1(config-profile)# exit
4.
(Optional) In the base profile, create nested profile assignments for the
upper-interface encapsulation types, and include additional profile characteristics
for other encapsulation types as needed.
638 ■
Configuring ATM 1483 Dynamic Subinterfaces
JUNOSe 11.1.x Link Layer Configuration Guide