Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 496 / 774

■
Address—IP address of the entry
■
Hardware Addr—Physical (MAC) address of the entry
■
Example
host1:vr1# show ip mac-validate interface atm 8/0.1
ATM8/0.1: Strict
Address Hardware Addr
180.1.0.2 0000.1111.2222
■
See show ip mac-validate interface.
show vlan subinterface
■
Use to display configuration and status information for a specified VLAN
subinterface or for all VLAN subinterfaces configured on the router.
■
Use the summary keyword to display only the counts of all VLAN subinterfaces
and VLAN major interfaces configured on the router.
■
Field descriptions
■
Interface—Type and specifier of the VLAN subinterface. For more information
about specifying the ATM physical interface on which you want to configure
the VLAN subinterface, see Interface Types and Specifiers in
JUNOSe Command
Reference Guide .
■
Status—Status of the VLAN subinterface: up, down, lowerLayerDown,
notPresent
■
MTU—Maximum allowable size (in bytes) of the maximum transmission
unit for the VLAN subinterface
■
Svlan Id—S-VLAN ID value, if configured
■
Vlan Id—VLAN ID value for the VLAN subinterface
■
Ethertype—S-VLAN Ethertype value, if configured
■
Total VLAN interfaces—Total numbers of VLAN subinterfaces and VLAN
major interfaces configured on the router; this is the only field that appears
when you specify the
summary keyword
■
Example 1—Displays full status and configuration information for all VLAN
subinterfaces configured on the router
host1# show vlan subinterface
Interface Status MTU Svlan Id Vlan Id Ethertype
------------------------- ---------- ---- -------- -------- ---------
ATM 3/0.1.2 Up 1522 ---- 11 ----
ATM 3/0.1.3 Up 1522 ---- 12 ----
ATM 3/1.1.1 Up 1522 ---- 13 ----
ATM 3/1.1.2 Up 1522 ---- 14 ----
ATM 3/2.1.1 Down 1526 4 255 0x9200
FastEthernet 4/5.1 Up 1522 ---- 1 ----
6 vlan subinterfaces found
464 ■
Monitoring Bridged Ethernet
JUNOSe 11.1.x Link Layer Configuration Guide