Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 464 / 774

■
PPP Initiate IPv6—Initiation of IPv6 over this PPP interface; enabled or
disabled
■
PPPoE Max Sessions—Maximum number of PPPoE subinterfaces that can
be on an interface
■
PPPoE Always-offer—Router offers to set up a session for the client, even if
the router has insufficient resources to establish a session; enabled or disabled
■
PPPoE Remote-Circuit-Id—The router captures and processes a
vendor-specific tag containing a remote circuit ID transmitted from a digital
subscriber line access multiplexer (DSLAM); enabled or disabled
■
PPPoE Log PPPoeControlPacket—Enabled or disabled
■
PPPOE duplicate-protect—Enabled or disabled
■
PPPoE ACNAME—Access concentrator name
■
PPPoE URL—URL sent in PADM message to PPPoE clients
■
PPPoE MOTM—Message of the minute sent in the PADM message to PPPoE
clients
■
PPPoE Service-Name Table—Name of the PPPoE service name table, if
configured for the specified profile
■
Example—Displays configuration information for a PPPoE profile assigned to a
dynamic interface
host1# show profile name pppoeProfile
Profile : pppoeProfile
Unnumbered interface on : loopback 1
Router : default
Directed Broadcast : Disabled
ICMP Redirects : Disabled
Access Route Addition : Enabled
Network Address Translation: Disabled
Source-Address Validation : Disabled
Ignore DF Bit : Disabled
Filter Option Packets : Disabled
Administrative MTU : 1500
TCP MSS value : 0
Inactivity Timer : Disabled
Route Map Name : Disabled
Auto Detect : Disabled
Auto Configure : Disabled
IGMP : Enabled
static-groups :
Input policy: bobb statistics enabled
Output policy: bobb statistics enabled
PPP Keepalive : 30
PPP Magic Number : enabled
PPP Peer DNS Priority : disabled
PPP Peer WINS Priority : disabled
PPP Authentication : pap/chap
PPP Authentication Router :
PPP Negotiate MRU : (use lower layer MRU)
432 ■
Monitoring PPPoE
JUNOSe 11.1.x Link Layer Configuration Guide