■
OutBytes—Number of bytes transmitted on this interface
■
InErrors—Number of incoming errors received on this interface
■
OutErrors—Number of outgoing errors on this interface
■
InPacketDiscards—Number of incoming packets discarded on this interface
■
OutDiscards—Number of outgoing packets discarded on this interface
■
Example
host1#
show atm aal5 interface atm 3/0
AAL5 Interface ATM 3/0 operational status: lowerLayerDown
time since last status change: 00:08:46
SNMP trap link-status: disabled
Auto configure ATM 1483 status: disabled
InPackets: 0
InBytes: 0
OutPackets: 0
OutBytes: 0
InErrors: 0
OutErrors: 0
InPacketDiscards: 0
OutDiscards: 0
■
See show atm aal5 interface.
show atm subinterface
■
Use to display the current state of all ATM subinterfaces, all ATM subinterfaces
configured on a specified ATM physical interface, or a specific ATM subinterface.
■
To specify an ATM subinterface for ERX7xx models, ERX14xx models, and
ERX310 router, use the
slot
/
port
.
subinterface
format.
■
slot
—Number of the chassis slot
■
port
—Port number on the I/O module
■
subinterface
—Number of the subinterface in the range 1–2147483647
■
To specify an ATM subinterface for E120 and E320 routers, use the
slot
/
adapter
/
port
.
subinterface
format.
■
slot
—Number of the chassis slot
■
adapter
—Identifier for the IOA within the E320 chassis, either 0 or 1, where:
■
0 indicates that the IOA is installed in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
■
1 indicates that the IOA is installed in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
■
port
—Port number on the IOA
■
subinterface
—Number of the subinterface in the range 1–2147483647
600
■
Monitoring Upper-Layer Dynamic Interfaces and Profiles
JUNOSe 11.1.x Link Layer Configuration Guide
Summary of Contents for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010
