Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 732 / 774

ATM 3/0.8100 1 8100 8100 PVC SNAP UBR 0 0 0 DOWN
8000 circuit(s) found
Reserved VCC ranges:
Start Start End End
Interface VPI VCI VPI VCI
--------- ----- ----- --- ---
ATM 2/0 2 100 2 102
ATM 2/0 3 300 3 303
2 reservation(s) found
■
Example 2—Displays all reserved VC ranges on the router
host1# show atm vc reserved
Reserved VCC ranges:
Start Start End End
Interface VPI VCI VPI VCI
--------- ----- ----- --- ---
ATM 2/0 2 100 2 102
ATM 2/0 3 300 3 303
2 reservation(s) found
■
See show atm vc.
show columns
■
Use to display static and dynamic interface counts for each interface column.
■
Counts for PPP and PPPoE interface columns are updated when the PPP layer
comes up.
■
Counts for bridged Ethernet and IP over ATM columns are updated when the
ATM layer comes up.
■
Field descriptions
■
Type—Interface type
■
Total—Total number of interfaces on this column
■
Static—Number of static interfaces on this column
■
Dynamic—Number of dynamic interfaces on this column
■
Example
host# show columns
Interface columns:
------------------
Type Total Static Dynamic
-------------------- ---------- ---------- ----------
Bridged Ethernet 4 2 2
IP over ATM 4 2 2
PPP 22 12 10
PPPoE 10 5 5
■
See show columns.
show pppoe interface
700 ■
Monitoring Dynamic Interfaces and Profiles
JUNOSe 11.1.x Link Layer Configuration Guide