Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 528 / 774

Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Protocol Actions:
Route IP
Route PPPoE
Port Count: 1
Interface Count: 1
Address Table:
Address Action Interface Age
-------------- ---------- ------------------- -----
1011.22b2.333c forward ATM3/3.1 ---
1234.abcd.5678 discard --- ---
Interfaces:
ATM3/3.1
Port Number: 1
Operational Status: LowerLayerDown
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Subscriber
Statistics:
In Octets: 0
In Frames: 0
In Discards: 0
In Errors: 0
Out Octets: 0
Out Frames: 0
Out Discards: 0
Out Errors: 0
queue 0: traffic class best-effort, bound to bridge ATM3/3.1
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
■
See show bridge.
show bridge groups
■
Use to display configuration information for all bridge groups currently configured
on your router.
■
To display the configuration settings for all bridge groups on your router, use the
details keyword.
■
Field descriptions
■
BridgeGroup—Name assigned to the bridge group
■
Bridge Mode—Bridging capability currently enabled, either concurrent routing
and bridging (CRB) or default bridging
■
Aging Time—Length of time, in seconds, that a MAC address entry can
remain in the forwarding table
496 ■
Monitoring Transparent Bridging
JUNOSe 11.1.x Link Layer Configuration Guide