Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 474 / 774

encapsulation bridge1483
■
Use to configure bridged IP as the encapsulation method on an interface.
■
Use the unrestrictedProxyArp keyword to allow the router to perform
unrestricted processing of ARP requests even if the route is on the same interface
on which the request is received. See “Proxy ARP” on page 437 for details.
■
Example
host1(config-if)# encapsulation bridge1483
■
Use the no version to remove bridged IP as the encapsulation method on the
interface.
■
See encapsulation bridge1483.
interface atm
■
Use to configure an ATM interface.
■
To specify an ATM interface for ERX7xx models, ERX14xx models, and ERX310
router, use the
slot / port .[ subinterface ] format.
■
slot —Number of the chassis slot
■
port —Port number on the I/O module
■
subinterface —Number of the subinterface in the range 1–2147483647
■
To specify an ATM interface for E120 and E320 routers, use the
slot / adapter / port [. subinterface ] format.
■
slot —Number of the chassis slot
■
adapter —Identifier for the IOA within the E320 chassis, either 0 or 1, where:
■
0 indicates that the IOA is installed in the right IOA bay (E120 router)
or the upper IOA bay (E320 router).
■
1 indicates that the IOA is installed in the left IOA bay (E120 router) or
the lower IOA bay (E320 router).
■
port —Port number on the IOA
■
subinterface —Number of the subinterface in the range 1–2147483647
■
For more information, see “Creating a Basic Configuration” on page 22 in
“Configuring ATM” on page 3.
■
Examples
host1(config)# interface atm 3/1.20
host1(config)# interface atm 5/0/1.20
■
Use the no version to remove the ATM subinterface or the logical interface.
■
See interface atm.
442 ■
Configuring Bridged IP
JUNOSe 11.1.x Link Layer Configuration Guide