Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 454 / 774

■
PADR received/PADR transmitted—Number of request control packets
received/transmitted
■
PADS received/PADS transmitted—Number of session confirmation
control packets received/transmitted
■
PADT received/PADT transmitted—Number of termination control
packets received/transmitted
■
PADM received/PADM transmitted—Number of message control packets
received/transmitted
■
PADN received/PADN transmitted—Number of network control packets
received/transmitted
■
PAD packets received—Total number of control packets received on the
interface
■
PAD packets transmitted—Total number of control packets transmitted on
the interface
■
Invalid PAD Packets
■
Invalid Version—Number of control packets received with an invalid
version
■
Invalid PAD Code—Number of control packets received with an invalid
code
■
Invalid PAD Tags—Number of control packets received with invalid tags
■
Invalid PAD Tag length—Number of control packets received with an
invalid tag length
■
Invalid PAD Type—Number of control packets received with an invalid
type
■
Invalid PADI Session—Number of invalid PPPoE Active Discovery
Initiation sessions
■
Invalid PADR Session—Number of invalid PPPoE Active Discovery
Request sessions
■
Invalid PAD packet length—Number of control packets received with
an invalid packet length
■
Invalid PAD packets—Number of invalid control packets received
■
Total Invalid PAD packets—Total number of invalid control packets received
on the interface
■
Insufficient Resources—Number of requests denied because of an inadequate
number of sessions; check the number of active clients
■
Lockout Configuration (seconds)—Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column;
for more information about these fields, see “Configuring Encapsulation
422 ■
Monitoring PPPoE
JUNOSe 11.1.x Link Layer Configuration Guide