Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 633 / 774

■
To display brief summary information for all ATM subinterfaces, or for ATM
subinterfaces configured on a specified ATM physical interface, use the
summary
keyword.
■
To display status information only for ATM subinterfaces with a specific operating
status, use the
status keyword with one of the following status values. (See the
Status field description for an explanation of these values.)
■
dormant
■
dormantLockout
■
down
■
lowerLayerDown
■
notPresent
■
up
■
To display the current state of an ATM subinterface created on the PVC with the
specified VPI and VCI values, use the
atm slot / port / vpi / vci format (for ERX7xx
models, ERX14xx models, and ERX310 router) or the slot/adapter/port/vpi/vci
format (for E120 and E320 routers) to identify the ATM subinterface (Example
5).
NOTE: You can use the atm slot / port / vpi / vci format as an alternative to the
atm slot / port . subinterface format with the specific show interface and show
subinterface commands to monitor all ATM 1483 subinterfaces (except NBMA
interfaces) as well as the upper-layer interfaces configured over an ATM 1483
subinterface. You cannot, however, use the
atm slot / port / vpi / vci format to create or
modify an ATM 1483 subinterface.
These guidelines also apply to E120 and E320 routers when you use the
atm slot/adapter/port/vpi/vci format as an alternative to the
atm slot / adapter / port . subinterface format.
■
For more information, see “Creating a Basic Configuration” on page 22 in
“Configuring ATM” on page 3.
■
Field descriptions
■
Interface—Interface identifier
■
ATM-Prot—One of the following ATM protocol types:
■
RFC-1483—Multiprotocol encapsulation over AAL5
■
NBMA—Nonbroadcast multiaccess interface
■
ATM/MPLS—Local ATM passthrough interface
■
VCD—Virtual circuit descriptor
■
VPI—Virtual path identifier
Monitoring Upper-Layer Dynamic Interfaces and Profiles
■ 601
Chapter 17: Configuring Dynamic Interfaces