Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 434 / 774

■
Use in Interface Configuration mode.
■
Example
host1(config-if)# interface fastEthernet 1/0.1.1
host1(config-if)# pppoe motm Router going down at 10:00 p.m.
■
Use the no version to disable the message.
■
See pppoe motm.
pppoe motm
■
Use in a profile to cause the PPPoE application to send the string to the new
client that is created when the profile is dynamically attached to an IP interface.
■
The message string is saved in nonvolatile storage (NVS).
■
Use in Profile Configuration mode.
■
Example
host1(config-profile)# pppoe motm Router going down now
■
Use the no version to disable the message.
■
See pppoe motm.
pppoe url
■
Use in the context of a PPPoE subinterface to cause the PPPoE application to
send the specified PADM message to the client as it is configured (if connected).
■
The message is also sent whenever the subinterface transitions from down to
up.
■
The message string is saved in nonvolatile storage (NVS).
■
Use in Interface Configuration mode.
■
Example
host1(config-if)# interface fastEthernet 1/0.1.1
host1(config-if)# pppoe url http://www.relevanturl.com
■
Use the no version to disable the message.
■
See pppoe url.
pppoe url
■
Use in a profile to cause the PPPoE application to send the string to the new
client that is created when the profile is dynamically attached to an IP interface.
■
The message string is saved in nonvolatile storage (NVS).
■
PPPoE substitutes the following characters for information in the specified URL
string before transmitting:
■
%U user and domain name
■
%u user name
402 ■
Configuring PADM Messages
JUNOSe 11.1.x Link Layer Configuration Guide