manualshive.com logo in svg

Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

The Juniper JUNOSE 11.1.X Link Layer Configuration Manual, released on 4-7-2010, is a comprehensive guide for configuring link layer settings. Users can easily download this manual for free from our website, ensuring they have the necessary resources to effectively set up their network infrastructure.

Share
Download
background image

host1(config-if)#

pppoe sub

interface fastEthernet 4/1.1.1

7.

Specify PPP as the encapsulation method on the interface.

host1(config-if)#

encapsulation ppp

8.

Assign an IP address and mask.

host1(config-if)#

ip address 192.6.129.5 255.255.255.0

9.

(Optional) Configure additional VLAN subinterfaces by completing Steps 3 through
8.

Figure 15 on page 175 illustrates the PPPoE/VLAN/Fast Ethernet stacking, showing
two separate VLAN subinterfaces. One VLAN subinterface has two PPPoE
subinterfaces, and one VLAN subinterface has one PPPoE subinterface.

Figure 15: Example of PPPoE/VLAN/Fast Ethernet Stacking Configuration Procedure

Configuring MPLS over VLAN

To configure MPLS over VLAN over an Ethernet interface:

1.

Specify a Fast Ethernet, Gigabit Ethernet, or 10-Gigabit Ethernet port.

host1(config)#

interface fastEthernet 4/0

Creating a VLAN Subinterface

■

175

Chapter 5: Configuring VLAN and S-VLAN Subinterfaces

Summary of Contents for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010

NAPCO ISEEVIDEO Brochure preview
ISEEVIDEO
Brand: NAPCO Pages: 1
F-SECURE ONLINE BACKUP - HELP Manual preview
ONLINE BACKUP - HELP
Brand: F-SECURE Pages: 20
Alcatel-Lucent AUTOMATED MESSAGE DELIVERY SYSTEM 5.0 Quick Start Manual preview
AUTOMATED MESSAGE DELIVERY SYSTEM 5.0
Brand: Alcatel-Lucent Pages: 4
F-SECURE INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61... Administrator'S Manual preview
INTERNET GATEKEEPER WINDOWS 2000-2003 SERVER 6.61...
Brand: F-SECURE Pages: 414
ScanSoft TextBridge PRO 8.5 User Manual preview
TextBridge PRO 8.5
Brand: ScanSoft Pages: 243
Novell LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007 Manual preview
LINUX ENTERPRISE DESKTOP 10 SP1 - GNOME 23-05-2007
Brand: Novell Pages: 280
SanDisk Membrain Software User Manual preview
Membrain Software
Brand: SanDisk Pages: 14
IBM BJ0NJML - Service And Asset Management Integration Manual preview
BJ0NJML - Service And Asset Management
Brand: IBM Pages: 330
IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS Getting Started Manual preview
PERFORMANCE MANAGEMENT FOR POWER SYSTEMS
Brand: IBM Pages: 12
Acer ASM 7 Faq preview
ASM 7
Brand: Acer Pages: 32
Acer Altos RAIDWatch Manual preview
Altos RAIDWatch
Brand: Acer Pages: 212
Sony MSSW-IC2 User Manual preview
MSSW-IC2
Brand: Sony Pages: 2
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Supplementary Manual preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Brand: Sony Pages: 1
Sony ICDBM1 - Memory Stick Media Digital Voice Recorder Specifications preview
ICDBM1 - Memory Stick Media Digital Voice Recorder
Brand: Sony Pages: 2
Sony ICD-BP150 - Ic Recorder Specifications preview
ICD-BP150 - Ic Recorder
Brand: Sony Pages: 2
Sony D-NS921F - Portable Cd Player Specifications preview
D-NS921F - Portable Cd Player
Brand: Sony Pages: 2
Sony MS Export User Manual preview
MS Export
Brand: Sony Pages: 9
Sony Music Box v.2.1.0 Manual preview
Music Box v.2.1.0
Brand: Sony Pages: 12

Brands by name

Popular brands

Load more brands