Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 324 / 774

■
LCP protocol statistics—Shows the following statistics for the life of the
interface (since system boot or interface creation, whichever is later)
■
in-keepalive-requests—Number of received keepalive requests (LCP Echo
Requests)
■
out-keepalive-requests—Number of transmitted keepalive requests
■
in-keepalive-replies—Number of received keepalive replies
■
out-keepalive-replies—Number of transmitted keepalive replies
■
keepalive-failures—Number of keepalive failures reported on the interface
■
max-renegotiation-terminates—Number of renegotiation terminations
for the PPP session
■
IP protocol statistics
■
max-renegotiation-terminates—Number of times the link has been
terminated since it was created, due to the peer exceeding the maximum
renegotiation attempts.
■
IPv6 protocol statistics
■
max-renegotiation-terminates—Number of times the link has been
terminated since it was created, due to the peer exceeding the maximum
renegotiation attempts.
■
Authentication configuration
■
authenticate-retry—Maximum number of authentication retries
configured using the
ppp max-bad-auth command
■
authentication-router—Virtual router for the authentication virtual router
context
■
Authentication status
■
grant—Authentication status (true = access granted, false = access not
granted)
■
session-timeout—Session timeout, in seconds; session is terminated at
expiration
■
inactivity-timeout—Inactivity timeout, in seconds; session is terminated
if it is not active for specified timeout
■
accounting-timeout—Accounting timeout in seconds; frequency of
accounting updates to the authentication server
■
peer-ip-address—IP address to be used in negotiation of peer IP address
■
peer-ip-address-mask—IP address mask to be used in negotiation of the
peer IP address mask
■
peer-primary-dns-address—IP address to be used in negotiation of the
peer primary DNS address
292 ■
Monitoring PPP Interfaces
JUNOSe 11.1.x Link Layer Configuration Guide