manualshive.com logo in svg

Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

The Juniper JUNOSE 11.1.X Link Layer Configuration Manual, released on 4-7-2010, is a comprehensive guide for configuring link layer settings. Users can easily download this manual for free from our website, ensuring they have the necessary resources to effectively set up their network infrastructure.

Share
Download
background image

   authentication                 none
   magic-number                   enabled
   magic-number-mismatch          ignore 
   keepalive-timer                30 seconds
   restart-timer                  3 seconds
   max-terminate                  2
   max-configure                  10
   max-failure                    5
LCP protocol status
   link-status                    network

LCP negotiated options            local               peer
   max-receive-unit               1590                1590
   max-receive-reconstructed-unit 1590                1590
   authentication                 none                none
   magic-number                   0x6c079eb0          0x2c5a5798
   pfc                            none                none
   acfc                           none                none
LCP Endpoint Discriminator options
   local discriminator class      Locally Assigned Address
   local endpoint discriminator   0x31393933313030303800001b000001
   peer discriminator class       Locally Assigned Address
   peer endpoint discriminator    0x31393933313030303800001b000002
LCP protocol statistics
   in-keepalive-requests          70
   out-keepalive-requests         70
   in-keepalive-replies           70
   out-keepalive-replies          70
   keepalive-failures             0
   max-renegotiation-terminates   10
PPP multilink member-interface serial 2/0:2/1 is up
Link interface administrative status is open
No baseline has been set
Interface statistics              in                  out
   packets                        0                   0
   octets                         1508                1996
   errors                         0                   0
   discards                       0                   0
LCP protocol configuration
   max-receive-unit               use lower layer
   authentication                 none
   magic-number                   enabled
   magic-number-mismatch          ignore 
   keepalive-timer                30 seconds
   restart-timer                  3 seconds
   max-terminate                  2
   max-configure                  10
   max-failure                    5
LCP protocol status
   link-status                    network
LCP negotiated options            local               peer
   max-receive-unit               1590                1590
   max-receive-reconstructed-unit 1590                1590
   authentication                 none                none
   magic-number                   0x7ada4a05          0x1bb178cd
   pfc                            none                none
   acfc                           none                none

LCP Endpoint Discriminator options
   local discriminator class      Locally Assigned Address
   local endpoint discriminator   0x31393933313030303800001b000001
   peer discriminator class       Locally Assigned Address

344

■

Monitoring MLPPP

JUNOSe 11.1.x Link Layer Configuration Guide

Summary of Contents for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010

ACRONIS BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3 Cli Reference Manual preview
BACKUP AND RECOVERY 10 ADVANCED SERVER VIRTUAL EDITION - COMMAND LINE REFERENCE UPDATE 3
Brand: ACRONIS Pages: 54
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
Applied Biosystems Data Explorer 4 Series User Manual preview
Data Explorer 4 Series
Brand: Applied Biosystems Pages: 447
Lowrance MapCreate 6 Install And Operation Instructions preview
MapCreate 6
Brand: Lowrance Pages: 76
FieldServer FS-8700-115 Instruction Manual preview
FS-8700-115
Brand: FieldServer Pages: 15
FieldServer FS-8704-14 EtherNet Driver Manual preview
FS-8704-14 EtherNet
Brand: FieldServer Pages: 30
Bay Networks MicroManager Installation Manual preview
MicroManager
Brand: Bay Networks Pages: 15
Xtramus Network Device NuDOG-MPT User Manual preview
Network Device NuDOG-MPT
Brand: Xtramus Pages: 27
Sanford LabelWriter 450 Duo Label Printer User Manual preview
LabelWriter 450 Duo Label Printer
Brand: Sanford Pages: 122
Cabletron Systems SmartSwitch 9A100 Upgrade Instructions preview
SmartSwitch 9A100
Brand: Cabletron Systems Pages: 2
Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE Installation Manual preview
SUSE LINUX ENTERPRISE SERVER 10 STORAGE
Brand: Novell Pages: 7
Novell SUPPORT ADVISOR 2.0.1 Administration Manual preview
SUPPORT ADVISOR 2.0.1
Brand: Novell Pages: 22
Novell PRODUCT NAME 10.3 Manual preview
PRODUCT NAME 10.3
Brand: Novell Pages: 14
Novell LINUX ENTERPRISE DESKTOP 10 - IPRINT CLIENT Manual preview
LINUX ENTERPRISE DESKTOP 10 - IPRINT CLIENT
Brand: Novell Pages: 14
Novell DST - READ ME 03-2007 Manual preview
DST - READ ME 03-2007
Brand: Novell Pages: 4
Novell DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2 Installation Manual preview
DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2
Brand: Novell Pages: 11
Novell Sentinel Rapid Deployment 6.1 Installation Manual preview
Sentinel Rapid Deployment 6.1
Brand: Novell Pages: 84
Novell GROUPEWISE 8 - SUPPORT PACK 2 05-2010 Manual preview
GROUPEWISE 8 - SUPPORT PACK 2 05-2010
Brand: Novell Pages: 35

Brands by name

Popular brands

Load more brands