Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 388 / 774

To configure reassembly on multilink classes in a dynamic profile:
host1(config-profile)# ppp multilink multiclass reassembly best-effort voice
otherData video
To configure reassembly on multilink classes in a static MLPPP interface:
host1(config-if)# ppp multilink multiclass reassembly best-effort voice
otherData video
The order of the QoS traffic classes does not affect the execution of the command.
NOTE: You must include the best-effort traffic class in the ppp multilink multiclass
reassembly command, or the command fails.
Related Topics
JUNOSe Link Layer Configuration Guide , Chapter 17, Configuring Dynamic Interfaces
■
■
ppp multilink multiclass reassembly
Example: Configuring Multiclass MLPPP on a Dynamic Interface
The following example shows how to configure multiclass MLPPP on a dynamic
MLPPP interface. To configure multiclass MLPPP you first define the traffic classes
that need to be mapped to the multilink classes. You configure multiclass MLPPP in
the dynamic profile and optionally configure fragmentation and reassembly on the
multiclass MLPPP interface.
1.
Define the QoS traffic classes.
host1 (config)# traffic-class voice
host1 (config-traffic-class)# fabric-strict-priority
host1 (config)# traffic-class low-loss
host1 (config-traffic-class)# fabric-strict-priority
host1 (config)# traffic-class low-latency
host1 (config-traffic-class)# fabric-strict-priority
For more information about defining QoS traffic classes, see Traffic Class and
Traffic-Class Groups Overview.
2.
Create a dynamic profile.
host1(config)# profile ppp-multilink-dynamic-profile
3.
Configure multiclass MLPPP in the dynamic profile.
host1 (config-profile)# ppp multilink multiclass multilink-classes 4
host1(config-profile)# ppp multilink multiclass traffic-class best-effort voice
low-loss low-latency
356 ■
Example: Configuring Multiclass MLPPP on a Dynamic Interface
JUNOSe 11.1.x Link Layer Configuration Guide