Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 369 / 774

PPP interface mlppp group2 is up
PPP multilink member-interface serial 2/1:1/1 is up
Time since last baseline 00:00:23
Interface statistics in out
packets 0 0
octets 125 132
errors 0 0
discards 0 0
PPP multilink member-interface serial 2/1:2/1 is up
Time since last baseline 00:00:25
Interface statistics in out
packets 0 0
octets 135 138
errors 0 0
discards 0 0
PPP multilink member-interface serial 2/1:3/1 is up
Time since last baseline 00:00:30
Interface statistics in out
packets 0 0
octets 125 132
errors 0 0
discards 0 0
2 mlppp interfaces found
show ppp interface mlppp
■
Use to display information about MLPPP interfaces.
■
You can display a great variety of information with this complex command. See
the
show ppp interface command in “Configuring Point-to-Point Protocol” on
page 263, for more detailed information about the display options.
■
Use the show ppp interface command to display information about all PPP
interfaces, including MLPPP interfaces.
■
Field descriptions
■
PPP interface mlppp—Name and administrative status (up or down) for an
MLPPP bundle
■
PPP multilink member-interface—Interface type, interface specifier, and
administrative status (up or down) for an MLPPP member link
■
Network interface administrative status—Indicates whether the interface for
the MLPPP bundle is administratively enabled (open), meaning that the
no
ppp shutdown command is operational, or administratively disabled (closed),
meaning that the ppp shutdown command is operational
■
Link interface administrative status—Indicates whether the interface for the
member link is administratively enabled (open), meaning that the
no ppp
shutdown command is operational, or administratively disabled (closed),
meaning that the ppp shutdown command is operational
■
Configured network protocol—Network protocol configured on the interface
■
Fragmentation and reassembly configuration:
■
Link interface fragmentation—Indicates whether MLPPP fragmentation
is enabled or disabled on the link interface
■
Link interface fragment size—MLPPP fragment size, in octets, currently
in use on the link interface
Monitoring MLPPP
■ 337
Chapter 9: Configuring Multilink PPP