Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 535 / 774

■
PPPoE—Specifies how the bridge interface handles PPPoE packets
■
Relearn—Specifies whether the bridge interface can relearn a MAC address
entry on a different interface from the one initially associated with this entry
in the forwarding table;
permit indicates that relearning is allowed, and deny
indicates that relearning is prohibited
■
Mpls—Specifies how the bridge interface handles MPLS packets
■
Example 1—Displays the rules for all default and nondefault subscriber policies
currently configured on the router
host1# show subscriber-policy
Subscriber: default Subscriber
ARP : Permit
Broadcast : Deny
Multicast : Permit
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Permit
Mpls : Permit
Subscriber: default Trunk
ARP : Permit
Broadcast : Permit
Multicast : Permit
Unknown Destination : Permit
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Permit
Mpls : Permit
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Relearn : Deny
Mpls : Permit
■
Example 2—Displays the rules for a specified subscriber policy
host1# show subscriber-policy client01
Subscriber: client01
ARP : Permit
Broadcast : Permit
Multicast : Deny
Unknown Destination : Deny
IP : Permit
Unknown Protocol : Permit
Unicast : Permit
PPPoE : Permit
Monitoring Transparent Bridging
■ 503
Chapter 15: Configuring Transparent Bridging