Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 114 / 774

■
RDI—Circuit is in RDI state
■
InOamF4Cells—Number of F4 OAM cells received
■
InOamF4CellsDropped—Number of incoming F4 OAM cells that were
dropped
■
InOamF4EndLoopbackCells—Total number of F4 end-to-end loopback cells
received on this interface, which is the sum of the following counts:
■
InOamF4EndLoopbackCommands—Number of F4 end-to-end loopback
commands received
■
InOamF4EndLoopbackResponses—Number of F4 end-to-end loopback
responses received
■
InOamF4SegLoopbackCells—Total number of F4 segment loopback cells
received on this interface, which is the sum of the following counts:
■
InOamF4SegLoopbackCommands—Number of F4 segment loopback
commands received
■
InOamF4SegLoopbackResponses—Number of F4 segment loopback
responses received
■
InOamF4EndAisCells—Number of F4 end-to-end AIS cells received
■
InOamF4SegAisCells—Number of F4 segment AIS cells received
■
InOamF4EndRdiCells—Number of F4 end-to-end RDI cells received
■
InOamF4SegRdiCells—Number of F4 segment RDI cells received
■
InOamF4EndCCActDeActCells—Number of F4 end-to-end activation or
deactivation CC cells received
■
InOamF4SegCCActDeActCells—Number of F4 segment activation or
deactivation CC cells received
■
InOamF4EndCCCells—Number of F4 end-to-end CC cells received
■
InOamF4SegCCCells—Number of F4 segment CC cells received
■
OutOamF4Cells—Number of F4 OAM cells sent
■
OutOamF4EndLoopbackCells—Total number of F4 end-to-end loopback cells
sent on this interface, which is the sum of the following counts:
■
OutOamF4EndLoopbackCommands—Number of F4 end-to-end loopback
commands sent
■
OutOamF4EndLoopbackResponses—Number of F4 end-to-end loopback
responses sent
■
OutOamF4SegLoopbackCells—Total number of F4 segment loopback cells
sent on this interface, which is the sum of the following counts:
■
OutOamF4SegLoopbackCommands—Number of F4 segment loopback
commands sent
82 ■
Monitoring ATM
JUNOSe 11.1.x Link Layer Configuration Guide