manualshive.com logo in svg

Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

The Juniper JUNOSE 11.1.X Link Layer Configuration Manual, released on 4-7-2010, is a comprehensive guide for configuring link layer settings. Users can easily download this manual for free from our website, ensuring they have the necessary resources to effectively set up their network infrastructure.

Share
Download
background image

Figure 27: GE-8 IOA Configuration Across IOAs (1:N)

Dual-Homed

Configurations with LAG

Disabled

Figure 28 on page 215 displays how you can configure Ethernet link redundancy with
LACP disabled locally using a dual-homed configuration. LACP is disabled because
there is no LAG at the peer.

Figure 28: Dual-Homed Configuration (1:1)

Ethernet Link Redundancy Behavior

When you create a LAG bundle, you can configure LACP with the Disabled, Passive,
or Active states. For more information about these states, see “LACP” on page 200.

Ethernet Link Redundancy Behavior

■

215

Chapter 6: Configuring 802.3ad Link Aggregation and Link Redundancy

Summary of Contents for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010







































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010

Canon EOS 60D Quick Start Manual preview
EOS 60D
Brand: Canon Pages: 5
AVIRA ANTIVIR VIRUS SCAN ADAPTER Configuration preview
ANTIVIR VIRUS SCAN ADAPTER
Brand: AVIRA Pages: 29
Symantec 20032623 - Endpoint Protection Small Business Edition Implementation Manual preview
20032623 - Endpoint Protection Small Business Edition
Brand: Symantec Pages: 351
Novell DATA SYNCHRONIZER Administration Manual preview
DATA SYNCHRONIZER
Brand: Novell Pages: 50
AVG 8.5 EMAIL SERVER EDITION - V 85.4 User Manual preview
8.5 EMAIL SERVER EDITION - V 85.4
Brand: AVG Pages: 52
FARONICS DEEP FREEZE - INTEGRATING WITH ALTIRIS... Manual preview
DEEP FREEZE - INTEGRATING WITH ALTIRIS...
Brand: FARONICS Pages: 22
MACROMEDIA COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION... Getting Started preview
COLDFUSION MX 61-GETTING STARTED BUILDING COLDFUSION...
Brand: MACROMEDIA Pages: 134
FARONICS POWER SAVE MAC Manual preview
POWER SAVE MAC
Brand: FARONICS Pages: 34
Philips SA2SONGBRD/00 User Manual preview
SA2SONGBRD/00
Brand: Philips Pages: 18
Intrinsyc Telephony Modem Simulator Brochure preview
Telephony Modem Simulator
Brand: Intrinsyc Pages: 2
Ulead DVD MOVIEFACTORY 5 User Manual preview
DVD MOVIEFACTORY 5
Brand: Ulead Pages: 72
Red Hat CERTIFICATE SYSTEM 8.0 - ADMINISTRATION Admin Manual preview
CERTIFICATE SYSTEM 8.0 - ADMINISTRATION
Brand: Red Hat Pages: 564
AVG ANTI-VIRUS 2011 - REV 2011.07 User Manual preview
ANTI-VIRUS 2011 - REV 2011.07
Brand: AVG Pages: 210
AVG ANTI-VIRUS 2011 - REV 2011.06 User Manual preview
ANTI-VIRUS 2011 - REV 2011.06
Brand: AVG Pages: 210
Franklin eBook Reader User Manual preview
eBook Reader
Brand: Franklin Pages: 32
3Com 3C16120 - SuperStack 3 Server Load Balancer User Manual preview
3C16120 - SuperStack 3 Server Load Balancer
Brand: 3Com Pages: 99
3Com 3CR15600 - Enterprise Management Suite Getting Started Manual preview
3CR15600 - Enterprise Management Suite
Brand: 3Com Pages: 218
Elecard AVC HD Player 5.7 User Manual preview
AVC HD Player 5.7
Brand: Elecard Pages: 39

Brands by name

Popular brands

Load more brands