Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 462 / 774

host1:01# show pppoe subinterface summary
Total PPPoE subinterfaces: 116
Administrative Status:
Up: 115
Down: 1
Operational Status:
Up: 115
Down: 1
LowerLayerDown: 1
NotPresent: 0
■
See show pppoe subinterface.
show profile
■
Use to display information about profiles.
■
To display information about a specific profile, use the name keyword.
■
To display a list of profiles configured on the router, use the brief keyword.
■
Field descriptions
■
Profile—Name of the profile that is displayed
■
IP address—IP address and subnet mask of the interface, or none if the
interface is unnumbered
■
Unnumbered interface—Specifier for the unnumbered interface, or none if
the interface is numbered
■
Router—Name of the virtual router (VR) assigned to the profile; interfaces
created by the profile are attached to this VR
■
Directed Broadcast—Enabled or disabled
■
ICMP Redirects—Enabled or disabled
■
Access Route Addition—Enabled or disabled
■
Network Address Translation—Enabled or disabled; domain location (inside
or outside)
■
Source-Address Validation—Enabled or disabled
■
Ignore DF Bit—Enabled or disabled
■
Filter Option Packets—Router filters out packets with IP options; enabled or
disabled
■
Administrative MTU—MTU size configured on the profile
■
TCP MSS value—Maximum segment size for TCP SYN packets traveling
through the interface
■
Inactivity Timer—Inactivity timer setting; enabled or disabled
430 ■
Monitoring PPPoE
JUNOSe 11.1.x Link Layer Configuration Guide