Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 109 / 774

■
UNI version—UNI version: 3.0, 3.1, 4.0
■
Maximum VCs—Maximum number of virtual circuits supported on this
interface
■
Current VCs—Current number of virtual circuits configured
■
ILMI VPI/VCI—Number of VPI and VCI configured for ILMI (displayed only
when ILMI is configured on the interface)
■
VCD—Number of VCD (displayed only when ILMI is configured on the
interface)
■
ILMI keepalive—State and status of the ILMI (displayed only when ILMI is
configured on the interface)
■
Max VCI per VPI—Maximum number of virtual circuits on each virtual path
■
CAC admin state—Enabled, disabled
■
Subscription bandwidth—Maximum allowable bandwidth on the port
(displayed only when CAC is enabled)
■
UBR weight—Configured bandwidth for UBR and UBR-PCR connections
(displayed only when CAC is enabled)
■
Available bandwidth—Bandwidth currently available on the port (displayed
only when CAC is enabled)
■
SNMP trap link-status—Enabled, disabled
■
OAM cell receive status—Whether the ATM interface processes or flushes
OAM cells: enabled, disabled
■
OAM cell filter—Whether the interface flushes all OAM cells or flushes only
AIS and RDI alarm cells (displayed only when OAM cell receive status is
enabled)
■
atm oam loopback-location—Loopback location ID for this interface
■
Interface Alias—Text description or alias if configured for the interface
■
Assigned VC Class—Name of the VC class assigned to this interface, if
configured
■
InPackets—Number of packets received on this interface
■
InBytes—Number of bytes received on this interface
■
InCells—Number of cells received on this interface
■
OutPackets—Number of packets transmitted on this interface
■
OutBytes—Number of bytes transmitted on this interface
■
OutCells—Number of cells transmitted on this interface
■
InErrors—Number of incoming errors received on this interface
Monitoring ATM
■ 77
Chapter 1: Configuring ATM