Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 527 / 774

■
Subscriber Policy—Name of the subscriber policy currently in effect for
the bridge group interface
■
In Octets—Number of octets received on this interface
■
In Frames—Number of frames received on this interface
■
In Discards—Number of incoming packets discarded on this interface
■
In Errors—Number of incoming errors received on this interface
■
Out Octets—Number of octets transmitted on this interface
■
Out Frames—Number of frames transmitted on this interface
■
Out Discards—Number of outgoing packets discarded on this interface
■
Out Errors—Number of outgoing errors on this interface
■
queue—Hardware packet queue associated with the specified traffic
class and interface
■
Queue length—Length of the queue, in bytes
■
Forwarded packets, Bytes—Number of packets and bytes forwarded on
this queue
■
Dropped committed packets, Bytes—Number of committed packets and
bytes that were dropped
■
Dropped conformed packets, Bytes—Number of conformed packets and
bytes that were dropped
■
Dropped exceeded packets, Bytes—Number of exceeded packets and
bytes that were dropped
■
Example 1—Displays configuration settings for the specified bridge group
host1# show bridge westford01
BridgeGroup: westford01
Bridge Mode: CRB
Aging Time: 300 secs
Learning: Enabled
Max Learn: Unlimited
Link Status Snmp Traps: Disabled
Subscriber Policy: default Subscriber
Protocol Actions:
Route IP
Route PPPoE
Port Count: 1
Interface Count: 1
■
Example 2—Displays information about configuration settings, MAC address
table entries, and bridge group interfaces for the specified bridge group
host1# show bridge westford01 all
BridgeGroup: westford01
Bridge Mode: CRB
Aging Time: 300 secs
Monitoring Transparent Bridging
■ 495
Chapter 15: Configuring Transparent Bridging