Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 635 / 774

■
Detected 1483 encapsulation—If the encapsulation type is set to
aal5autoconfig , displays the 1483 encapsulation type detected on the
subinterface (displays AUTO until a packet is detected)
■
Detected dynamic interface—Type of dynamic upper interface detected
during autoconfiguration: bridged Ethernet, IP, PPP, PPPoE, or (if no packet
has been received) none
■
Interface types in lockout—Encapsulation types currently experiencing
lockout: bridged Ethernet, IP, PPP, PPPoE, or none
■
Lockout state (seconds)—Settings of encapsulation type lockout for the
upper-layer encapsulation type indicated
■
Min—Minimum lockout time, in seconds
■
Max—Maximum lockout time, in seconds
■
Current—Current lockout time, in seconds; displays 0 (zero) if lockout
is not occurring
■
Elapsed—Time elapsed into the lockout time, in seconds; displays 0
(zero) if lockout is not occurring
■
Next—Lockout time for the router to use for the next lockout event, in
seconds
■
Assigned profile—For each dynamic interface type, indicates whether or not
a profile is assigned and, if assigned, displays the profile name
■
Subscriber info—Subscriber login information for the specified dynamic
interface type (bridged Ethernet or IP)
■
SNMP trap link-status—Trap link status: enabled or disabled
■
InPackets—Number of packets received on this interface
■
InBytes—Number of bytes received on this interface
■
OutPackets—Number of packets transmitted on this interface
■
OutBytes—Number of bytes transmitted on this interface
■
InErrors—Number of errors received on this interface
■
OutErrors—Number of outgoing errors on this interface
■
InPacketDiscards—Number of incoming packets discarded on this interface
■
InPacketsUnknownProtocol—Number of incoming packets with an unknown
protocol type
■
OutDiscards—Number of outgoing packets discarded on this interface
■
Example 1—Displays the current state of all ATM subinterfaces
host1# show atm subinterface
Circuit Interface
Interface ATM-Prot VCD VPI VCI Type Encap MTU Status Type
Monitoring Upper-Layer Dynamic Interfaces and Profiles
■ 603
Chapter 17: Configuring Dynamic Interfaces