Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 287 / 774

Table 12: show ethernet oam lfm statistics Output Fields (continued)
Field Description Field Name
Number of unique Event Notification PDUs received on the
interface, when the number of errors equals or exceeds the
configured low threshold for a specified time period. A breakdown
of the types of errors that resulted in the generation of an Event
Notification PDU is also displayed Event Notification OAMPDUs
Number of errored frame event TLVs that have been received
since the OAM sublayer was reset Errored Frame
Number of symbols error event TLVs that have been received
since the OAM sublayer was reset Errored Symbol
Number of framed seconds error event TLVs that have been
received since the OAM sublayer was reset Errored Frame Seconds
Summary
Total number of loopback control PDUs received Loopback Control OAMPDUs
Number of duplicate event notification OAM PDUs received Duplicate Event Notification
OAMPDUs
Number of unsupported OAM PDUs received
Based on the counts displayed for the supported OAM PDUs in
the corresponding fields, you can determine additional details,
such as the number of Variable Request PDUs, by viewing the
value displayed in the Unsupported OAM PDUs field and
comparing it against the total number of all supported OAM PDUs
Unsupported OAMPDUs
Related Topics
Configuring 802.3ah OAM Link-Fault Management on page 242
■
■
show ethernet oam lfm statistics
Monitoring OAM Link-Fault Management Configuration for an Interface
Purpose
Display the current Ethernet OAM link-fault management configuration for a particular
interface, such as the discovery mode of the interface, the interval at which OAM
PDUs are transmitted to the remote peer, the number of OAM PDUs that can be
missed from the remote peer before a link-fault event is generated, actions that are
taken when the high threshold for an error is exceeded or when an OAM PDU from
a remote peer signifies a fault condition, link monitoring attributes, and remote
loopback settings.
Action
To display the runtime settings of link-monitoring and general OAM operations for
a particular interface:
host1# show ethernet oam lfm status GigabitEthernet 4/0
GigabitEthernet 4/0
Mode: Passive
Monitoring OAM Link-Fault Management Configuration for an Interface
■ 255
Chapter 7: Configuring IEEE 802.3ah OAM Link-Fault Management