Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 524 / 774

Removing Dynamic MAC Address Entries
You can remove all dynamic (learned) MAC address entries from the forwarding
table for a bridge group (using the
clear bridge command) or for a bridge interface
(using the clear bridge interface command). You can also use the clear bridge
address command to remove a specific dynamic MAC address entry from the
forwarding table for a bridge group.
clear bridge
■
Use to remove all dynamic MAC address entries from the forwarding table for
the specified bridge group.
■
Example
host1# show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
0090.1a01.0205 forward ATM3/3.1 0
1234.abcd.5678 discard --- ---
host1# clear bridge westford01
host1# show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
■
There is no no version.
■
See clear bridge.
clear bridge address
■
Use to remove a specific dynamic MAC address entry from the forwarding table
for the specified bridge group.
■
Example
host1# show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
0090.1a01.0205 forward ATM3/3.1 0
1234.abcd.5678 discard --- ---
host1# clear bridge westford01 address 1234.abcd.5678
host1# show bridge westford01 table
Bridge: westford01 MAC Address Table
Address Action Interface Age
-------------- ---------- ------------------- -----
0090.1a01.0205 forward ATM3/3.1 0
■
There is no no version.
■
See clear bridge address.
492 ■
Monitoring Transparent Bridging
JUNOSe 11.1.x Link Layer Configuration Guide