Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 461 / 774

host1:v0# show pppoe subinterface fastEthernet 1/1.1.1
PPPoE subinterface fastEthernet 1/1.1.1 is operStatusUp
URL String: http://www.urlofinterest.com
MOTM String: a horse walks into a bar
PPPoE subinterface fastEthernet 1/1.1.1 has a session id of 1
PPPoE Statistics
In Octets: 480
Out Octets: 256
In Packets: 8
Out Packets: 8
■
Example 2
host1:v0# show pppoe subinterface full
show pppoe subinterface fullPPPoE subinterface FastEthernet 2/0.11 is
operStatusUp (dynamic)
PPPoE subinterface FastEthernet 2/0.11 has a session id of 8
PPPoE subinterface FastEthernet 2/0.11 has source MAC address
0090.1a40.280a
PPPoE subinterface FastEthernet 2/0.11 has a MTU of 1494
PPPoE Statistics
In Octets: 165922
Out Octets: 108283
In Packets: 3607
Out Packets: 3608
■
See show pppoe subinterface.
show pppoe subinterface summary
■
Use to display the operational and administrative status of all configured PPPoE
subinterfaces.
■
Field descriptions
■
Total PPPoE subinterfaces—Number of configured PPPoE subinterfaces
included in summary
■
Administrative Status
■
Up—Number of subinterfaces not affected by manual administrative
intervention
■
Down—Number of subinterfaces that cannot flow because of manual
administrative intervention
■
Operational Status
■
Up—Number of subinterfaces that are operational
■
Down—Number of subinterfaces that are not operational
■
LowerLayerDown—Number of subinterfaces that are not operational
because an underlying interface is down
■
NotPresent—Number of subinterfaces that are not operational because
hardware is unavailable
■
Example
Monitoring PPPoE
■ 429
Chapter 12: Configuring Point-to-Point Protocol over Ethernet