Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 733 / 774

■
Use to display summary information about the encapsulation type lockout
parameters configured for PPPoE clients on a dynamic PPPoE subinterface
column.
■
The following field descriptions and example include only the portion of the
show pppoe interface command display relevant to lockout configuration for
PPPoE clients. For more information about using this command, see “show
pppoe interface” on page 421 in “Configuring Point-to-Point Protocol over
Ethernet” on page 375.
■
Field descriptions
■
Lockout Configuration (seconds)—Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
■
Min—Minimum lockout time, in seconds
■
Max—Maximum lockout time, in seconds
■
Total clients in active lockouts—Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
■
Total clients in lockout grace period—Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
period, see “Guidelines for Configuring Encapsulation Type Lockout” on
page 527 in “Configuring Dynamic Interfaces” on page 515.
■
Example
host1# show pppoe interface atm 3/0.101
. . .
Lockout Configuration (seconds): Min 5, Max 60
Total clients in active lockouts: 0
Total clients in lockout grace period: 0
■
See show pppoe interface.
show pppoe interface lockout-time
■
Use to display detailed information about the current encapsulation type lockout
condition for each PPPoE client associated with a dynamic PPPoE subinterface
column on a static PPPoE major interface.
■
Field descriptions
■
PPPoE interface—Specifier for the PPPoE interface
■
Lockout Configuration (seconds)—Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
■
Min—Minimum lockout time, in seconds
■
Max—Maximum lockout time, in seconds
■
Total clients in active lockouts—Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
■
Total clients in lockout grace period—Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
Monitoring Dynamic Interfaces and Profiles
■ 701
Chapter 18: Configuring Dynamic Interfaces Using Bulk Configuration