Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010, Configuration Manual

Page: 725 / 774

Profile override(s):
Bulk
Config
Interface Name VPI VCI Assigned Profile Status
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test 1 151 overrideProfile1 Active
ATM AAL5 3/0 test 1 161 overrideProfile1 Active
2 profile override(s) found
■
Example 4—Displays information only about overriding profile assignments for
all bulk-configured VC ranges on the router
host1# show atm bulk-config override
Profile override(s):
Bulk
Config
Interface Name VPI VCI Assigned Profile Status
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test 1 151 overrideProfile1 Active
ATM AAL5 3/0 test 1 161 overrideProfile1 Active
2 profile override(s) found
■
Example 5—Displays information only about overriding profile assignments for
a particular VC range configured on a specified ATM AAL5 interface
host1# show atm bulk-config atm 3/0 override
Profile override(s):
Bulk
Config
Interface Name VPI VCI Assigned Profile Status
------------ ------ --- --- ---------------- ------
ATM AAL5 3/0 test 1 151 overrideProfile1 Active
ATM AAL5 3/0 test 1 161 overrideProfile1 Active
2 profile override(s) found
■
See show atm bulk-config.
show atm subinterface
■
Use to display the current state of all ATM subinterfaces, all ATM subinterfaces
configured on a specified ATM physical interface, or a specific ATM subinterface.
■
To specify an ATM subinterface for ERX7xx models, ERX14xx models, and
ERX310 router, use the
slot / port . subinterface format.
■
slot —Number of the chassis slot
■
port —Port number on the I/O module
■
subinterface —Number of the subinterface in the range 1–2147483647
■
To specify an ATM subinterface for E120 and E320 routers, use the
slot / adapter / port . subinterface format.
Monitoring Dynamic Interfaces and Profiles
■ 693
Chapter 18: Configuring Dynamic Interfaces Using Bulk Configuration