Copyright
2004-2013 Baby Lock USA
Customer Support: 1-800-313-4110
BMP9 Ver. 4.21 Software Update
– p.1
Baby Lock Embroidery Professional PLUS
(Model BMP9)
Software Update Version 4.21
December, 2013
Introduction
If the software version of your BMP9 is earlier than Version 4.21, an update program is now available
for download to improve its performance.
Version 4.21 update will provide the following changes:
1.
Fixed the situation where the machine may not work correctly after the error message was
displayed by selecting the appliqué setting.
2.
Improved so that the embroidery pattern moves by 0.1 mm when the arrow keys are pressed on the
pattern editing screen.
When you press and hold the arrow keys, the pattern moves by 5 mm.
To confirm the software version of your BMP9
1.
Press the power switch to turn on your machine. The LCD screen comes on.
2.
Touch anywhere on the initial screen and then touch “OK”.
3.
Touch
(Settings key) at the bottom of the LCD display. The Settings screen appears.
4.
Switch screens by using
(Previous page key) or
(Next page key) to display the
software version.
Note:
The number of pages in the Settings screen will vary depending on the program version in
your machine.