Hitachi WJ200-001L, Instruction Manual

Page: 505 / 680

Ver.2

76
“H” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units

PM Initial Magnet
Position Estimation 0V
Wait Times
0-255   10


PM Initial Magnet
Position Estimation
Detect Wait Times
0-255
 
10


PM Initial Magnet
Position Estimation
Detect Times
0-255   30


PM Initial Magnet
Position Estimation
Voltage Gain
0-200
 
100

H102 to H134 are displayed only when PM mode. PM mode only.
Expansion Card Functions
“P” parameters will be appeared when the expansion option is connected.
NOTE:. Mark “

” in A line of [ Run Mode Edit] shows the accessible parameters when b031 is not set “10”,
high level access.
NOTE:. Mark “

” in B line of [ Run Mode Edit] shows the accessible parameters when b031 is set “10”,
high level access
“P” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units

Reaction when option card
error occurs
Two option codes:

…Inverter trips

…Ignores the error (Inverter
continues operation)


00

 [EA] terminal selection
Three option codes:

…Speed reference (incl. PID)

…For control with encoder feedback

…Extended terminal for EzSQ
  00


Pulse train input mode
selection for feedback
Four option codes:

…Single-phase pulse [EA]

…2-phase pulse (90  difference) 1
([EA] and [EB])

…2-phase pulse (90  difference) 2
([EA] and [EB])

…Single-phase pulse [EA] and
direction signal [EB]
 
00

 Encoder pulse setting
Sets the pulse number (ppr) of the
encoder, set range is 32~1024 pulses
  512.


Simple positioning
selection
Two option codes:

…simple positioning deactivated

…simple positioning activated
  00

 Creep Speed
Set range is start frequency (

)
~10.00 Hz


5.00
Hz

Over-speed error detection
level
Set range is 0~150%

 115.0
%

Speed deviation error
detection level
Set range is 0~120 Hz

 10.00
Hz

Deceleration time Input
Type

…Operator,

…EzSQ   00
