Hitachi WJ200-001L, Instruction Manual, Page: 76 / 680

2

27
NOTE: Pressing the [ESC] key will make the display go to the top of next function
group, regardless the display contents. (e.g.
 
[ESC]
 
)
 
 
ESC
SET
Group "d"
Func. code display
 
.
 
 
 
 
 
Group "F"
Func. code display
 
 

.
 

.
 
SET
SET ESC
SET ESC
Save
Data display (F001 to F003)
Data does not blink because of real time synchronizing
: Saves the data in EEPROM and returns to func. code display .
: Returns to func. code display without saving data.
SET
ESC
 
 
Group "A"
Func. code display
 
 
 
 
SET
SET ESC
SET ESC
Data display
When data is changed, the display starts blinking, which means that
new data has not been activated yet.
: Saves the data in EEPROM and returns to func. code display .
: Cancels the data change and returns to func. code display.
SET
ESC
Group "b"
 
Group "C"
 
Group "H"
 
Group "P"
 
Group "U"
 
ESC
Func. code display
: Jumps to the next group
ESC
Func. code display
: Moves to data display
SET
ESC
ESC
ESC
ESC
ESC
ESC


Press the both up and down key at the same
time in func. code or data display, then
single-digit edit mode will be enabled.
Refer to 2-35 for further information.