Hitachi WJ200-001L, Instruction Manual

Page: 390 / 680

C
− − − −
3
Main Profile Parameters
NOTE :. Mark “ ” in A line of [ Run Mode Edit] shows the accessible parameters when
b031 is not set “10”, high level access.
NOTE :. Mark “ ” in B line of [ Run Mode Edit] shows the accessible parameters when
b031 is not set “10”, high level access.
* Please change from"
04
(Basic display)" to "
00
(Full display)" in parameter
B037
(Function code display restriction), in case some parameters cannot be displayed.
“F” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units
F001 Output frequency setting Standard default target
frequency that determines
constant motor speed, range is
0.0 / start frequency to
maximum frequency (A004)
0.0 Hz
F002
Acceleration time (1) Standard default acceleration,
range is 0.01 to 3600 sec.
10.0 sec.
F202
Acceleration time (1),
2
nd
motor
10.0 sec.
F003
Deceleration time (1) Standard default deceleration,
range is 0.01 to 3600 sec.
10.0 sec.
F203
Deceleration time (1),
2
nd
motor
10.0 sec.
F004
Keypad RUN key routing Two options; select codes:
00
…
Forward
01
…
Reverse
00
−