Hitachi WJ200-001L, Instruction Manual

Page: 398 / 680

C
− − − −
11
“A” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units
A143
Calculation symbol Calculates a value based on the
A input source ( A141 selects)
and B input source ( A142
selects).
Three options:
00
…
ADD (A input + B input)
01
…
SUB (A input - B input)
02
…
MUL (A input * B input)
00
−
A145
ADD frequency An offset value that is applied
to the output frequency when
the [ADD] terminal is ON.
Range is 0.0 to 400.0 Hz
0.00 Hz
A146
ADD direction select Two options:
00
…
Plus (adds A145 value to
the output frequency
setting)
01
…
Minus (subtracts A145
value from the output
frequency setting)
00
−
a150
Curvature of EL-S-curve at
the start of acceleration
Range is 0 to 50%
10. %
a151
Curvature of EL-S-curve at
the end of acceleration
Range is 0 to 50%
10. %
a152 Curvature of EL-S-curve at
the start of deceleration
Range is 0 to 50%
10. %
a153
Curvature of EL-S-curve at
the end of deceleration
Range is 0 to 50%
10. %
a154
Deceleration hold frequency Sets the frequency to hold
deceleration, range is 0.0 to
400.0Hz
0.00 Hz
a155
Deceleration hold time Sets the duration of
deceleration hold, range is 0.0
to 60.0 seconds
0.0 sec.
a156
PID sleep function action
threshold
Sets the threshold for the
action, set range 0.0 to 400.0
Hz
0.00 Hz
a157
PID sleep function action
delay time
Sets the delay time for the
action, set range 0.0 to 25.5 sec
0.0 sec
A161 [VR] input active range start
frequency
The output frequency
corresponding to the analog
input range starting point,
range is 0.0 to 400.0 Hz
0.00 Hz
A162
[VR] input active range end
frequency
The output frequency
corresponding to the current
input range ending point,
range is 0.0 to 400.0 Hz
0.00 Hz
A163
[VR] input active range
start %
The starting point (offset) for
the current input range,
range is 0. to 100.%
0. %