Hitachi WJ200-001L, Instruction Manual

Page: 502 / 680

Ver.2

73
Output Function Summary Table
Option
Code
Terminal
Symbol
Function Name Description
 WCOI
Window Comparator
for Analog Current
Input
ON
Analog current input value is inside of the window
comparator
OFF
Analog current input value is outside of the window
comparator
 FREF
Frequency Command
Source
ON Frequency command is given from the operator
OFF Frequency command is not given from the operator
 REF Run Command Source
ON Run command is given from the operator
OFF Run command is not given from the operator
 SETM 2
nd
Motor Selection
ON 2
nd
motor is being selected
OFF 2
nd
motor is not being selected
 EDM
STO (Safe Torque Off)
Performance Monitor
(Output terminal 11
only)
ON STO is being performed
OFF STO is not being performed
 OPO Option card output
ON (output terminal for option card)
OFF (output terminal for option card)
 no Not used
ON -
OFF -
Motor Constants Functions
NOTE:. Mark “

” in A line of [ Run Mode Edit] shows the accessible parameters when b031 is not set “10”,
high level access.
NOTE:. Mark “

” in B line of [ Run Mode Edit] shows the accessible parameters when b031 is set “10”,
high level access
“H” Function
Run
Mode
Edit
Defaults
Func.
Code
Name Description A B Initial data Units

Auto-tuning selection
Three option codes:


Disabled

 Enabled with motor stop

 Enabled with motor rotation
 
00 

Motor constant selection
Two option codes:

 Hitachi standard motor


Auto tuned data
  00 

Motor constant selection,
2
nd motor
  00 

Motor capacity
Twelve selections:
0.1/0.2/0.4/0.75/1.5/2.2/3.7/
5.5/7.5/11/15/18.5
 
Specified by
the capacity
of each
inverter
model
kW

Motor capacity,
2
nd motor
  kW

Motor poles setting
Five selections:
2 / 4 / 6 / 8 / 10
 
4 poles

Motor poles setting,
2
nd
motor
 
4 poles

Motor speed response
constant
Set range is 1 to 1000
 
100. 

Motor speed response
constant, 2
nd motor
 
100. 

Motor stabilization
constant Motor constant (factory set),
range is 0 to 255
 
100. 