Hitachi WJ200-001L, Instruction Manual

Page: 567 / 680

Ver.3
−
− −
−
58
Case 3: When selecting 32-bit parameter for an internal register. (Please refer to the page 1 for setting
range.
）
Reading out Holding register [03h], target register=external register
Query:
Response:
No Field Name Example
(Hex)
1 Slave address 01
2 Function code 83
3 Exception code 31
4 CRC-16 (high order) 80
5 CRC-16 (low order) E4
As same as case 2, an exceptional response is given because 32-bit register is designated as an internal
register.
No Field Name Example
(Hex)
1 Slave address 01
2 Function code 03
3 Register start address (high order) 60
4 Register start address (low order) 02
5 Number of holding registers (high order) 00
6 Number of holding registers (low order) 01
7 CRC-16 (high order) 3B
8 CRC-16 (low order) CA
Register address value = Register
Number - 1
One register