Hitachi WJ200-001L, Instruction Manual, Page: 672 / 680

Ver.3.1
− − − −
7
Special monitor display (-S--, -F**) cancellation
・
The parameter of b147 can be used to select whether special monitor display is canceled temporarily by
pressing down a key on the keypad during special monitor display (-S--, -F**) is displayed. Please refer to
table Ver.3.1-5 for details of special monitor display.
・
In the case of b147=00 (Cancellation of special display is invalid) setting, key operation is not accepted at all,
and special monitor display (-S--, -F**) is kept on being displayed.
・
In the case of b147=01 (Cancellation of special display is valid) setting, special monitor display is canceled
temporarily by pressing a key on the keypad and then normal display (parameter display) is displayed.
・
After having canceled special monitor display, it returns to an original special monitor display content if no
key operation has been done for the time specified by b148 (Special monitor display re-display time). If
content of special monitor display is changed due to transition of signal status, it displays corresponding
special monitor display content immediately regardless of the cancellation time. (e.g.: change into “-F**”
state from “-S--” state)
・
b148 can adjust the time to re-display special monitor display after it has been cancelled. Special display is
displayed again after passing time specified by b148 from the last key operation.
Table Ver.3.1-6
Func. Func. Func. Func.
Code Code Code Code
Name
Name Name
Name Description
Description Description
Description A
A A
A B
B B
B Initial data
Initial data Initial data
Initial data
Modbus Modbus Modbus Modbus register register register register
number number number number
Resolution
Resolution Resolution
Resolution
b147 b147 b147 b147
Special monitor display
cancellation
00 00 00 00
…
Cancellation of special display
is invalid
0
0 0
01
1 1
1
…
Cancellation of special display
is valid
01 13d0h
-
b148 b148 b148 b148 Special monitor display
re-display time Time to return to special display,
range is 1 to 30 sec.
30 13d1h 1 [sec]
Increase of upper limit up of BRD Activation Level
・
The upper limit of b096 “BRD Activation Level” of 200V and 400V class are increased by 10V and 20V
respectively.
Table Ver.3.1-7
Func. Func. Func. Func.
Code Code Code Code
Name Name Name Name Description Description Description Description A A A A B B B B Initial data Initial data Initial data Initial data
Modbus Modbus Modbus Modbus register register register register
number number number number
Resolution Resolution Resolution Resolution
b096 b096 b096 b096
BRD activation level When internal DC voltage exceeds
the specified level, BRD circuit is
activated. When internal DC
voltage falls below the level, BRD
circuit is inactivated.
(Ver. 3.0 or before)Range is:
330 to 380 V (200V class)
660 to 760 V (400V class)
(Ver. 3.1 or after)Range is:
330 to 390 V (200V class)
660 to 780 V (400V class)
360/
720
1363h 1 [V]