Hitachi WJ200-001L, Instruction Manual

Page: 77 / 680

2

28
[Setting example]
After power ON, changing from

.

display to change the

(carrier frequency) data.
Function code

xxx are for monitor and not possible to change.
Function codes

xxx other than

are reflected on the performance just after changing the data
(before pressing SET key), and there will be no blinking.
When a function code is shown
…
When a data is shown
…
ESC key Move on to the next function group
Cancels the change and moves back to
the function code
SET key
Move on to the data display
Fix and stores the data and moves back
to the function code

key Increase function code Increase data value

key
Decrease function code Decrease data value

Note
Keep pressing for more than 1 second leads to d001 display, regardless the display situation. But note that
the display will circulates while keep pressing the [ESC] key because of the original function of the key.
(e.g.
        … 
displays

.

after 1 second)

 
.

Display is solid lighting.
 
.
 



.


Data of

will be shown on the
display after the first power ON

Press [ESC] key to show
the function code

Press [ESC] key to move on to the function group


Press [ESC] key twice to move on to the function group

.

Press Up key to change increase function code (



)

Press SET key to display the data of


Press up key to increase the
data (

.
  
.

)

Press SET key to set
and save the data
When data is changed, the display
starts blinking, which means that new
data has not been activated yet.
ESC


SET
ESC
ESC
SET
ESC


:Fix and stores the data and moves back to the function code
:Cancels the change and moves back to the function code
SET
ESC
SET