Hitachi WJ200-001L, Instruction Manual

Page: 177 / 680

3

92
Output Function Summary Table
Option
Code
Terminal
Symbol
Function Name Description
OFF Output frequency is higher than the threshold
specified in


DSE Speed Deviation
Excessive ON Deviation of speed command and actual speed
exceeds the specified value

.
OFF Deviation of speed command and actual speed
does not exceed the specified value

.
 POK Positioning Completion ON Positioning is completed
OFF Positioning is not completed

FA4 Frequency Arrival Type
4
–Over frequency
ON When output to motor is at or above the set freq.,
even if in accel (

) or decel (

) ramps
OFF When output to motor is OFF, or at a level below the
set frequency

FA5 Frequency Arrival Type
5
–Set frequency
ON When output to motor is at the set frequency, during
accel (

) and decel (

).
OFF When output to motor is OFF, or is not at a level of
the set frequency

OL2 Overload Advance
Notice Signal 2 ON When output current is more than the set threshold
(

) for the overload signal
OFF When output current is less than the set threshold
for the deviation signal

ODc Analog Voltage Input
Disconnect Detection ON
When the [O] input value <

setting (signal loss
detected)
OFF When no signal loss is detected

OIDc Analog Current input
Disconnect Detection ON
When the [OI] input value <

setting (signal loss
detected)
OFF When no signal loss is detected

FBV PID Second Stage
Output ON Transitions to ON when the inverter is in RUN Mode
and the PID Process Variable (PV) is less than the
Feedback Low Limit (

)
OFF Transitions to OFF when the PID Process Variable
(PV) exceeds the PID High Limit (

), and
transitions to OFF when the inverter goes from Run
Mode to Stop Mode
 NDc Network Disconnect
Detection ON When the communications watchdog timer (period
specified by

) has time out
OFF When the communications watchdog timer is
satisfied by regular communications activity
 LOG1 Logic Output Function 1 ON
When the Boolean operation specified by

has
a logical
“1” result
OFF
When the Boolean operation specified by

has
a logical
“0” result

LOG2 Logic Output Function 2 ON
When the Boolean operation specified by

has
a logical
“1” result
OFF
When the Boolean operation specified by

has
a logical
“0” result

LOG3 Logic Output Function 3 ON
When the Boolean operation specified by

has
a logical
“1” result
OFF
When the Boolean operation specified by

has
a logical
“0” result
 WAC Capacitor Life Warning
Signal ON Lifetime of internal capacitor has expired.
OFF Lifetime of internal capacitor has not expired.

WAF Cooling Fan Warning
Signal ON Lifetime of cooling fan has expired.