Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, User Manual

Page: 286 / 472

You can quickly copy and move items in the tree view by dragging them. To do this, click the item you want to
copy or move, hold down the right mouse button, and drag the item to the desired location. When the cursor
changes to a black arrow, release the mouse button to display a shortcut menu. Click Copy Here or Move Here,
as appropriate.
Shortcut Menu
You can display a shortcut menu for any item in the tree by right-clicking the item. The following commands
are available on the shortcut menu whenever they are applicable:
Purpose Command
Adds a new scene to the tree view. Add Scene
Adds a new camera to the tree view. Add Camera
Adds an animation set to the tree view. Add Animation Set
Updates the selected animation set. Update Animation Set
Adds a new section plane to the tree view. Add Section Plane
Adds a folder to the tree view. Folders can
hold scene components and other folders. Add Folder
Adds a scene folder to the tree view. Scene
folders can hold scenes and other scene Add Scene Folder
folders. When you add a scene folder, if
you do this while having an empty scene
folder selected, Navisworks creates the new
scene folder at the very top of the tree,
otherwise it creates it beneath your current
selection.
Selects loop mode for scenes and scene
animations. The animation plays forward Loop
to the end, then restarts again from the
beginning, looping indefinitely.
Selects ping-pong mode for scenes and
scene animations. The animation plays Ping-Pong
forward to the end, and then plays back-
wards to the beginning. Unless loop mode
is also selected, this will only happen once.
Selects infinite mode; it only applies to
scenes, and will make the scene play indef- Infinite
initely (that is until the Stop button
is pressed).
Cuts the selected item in the tree to clip-
board. Cut
Copies the selected item in the tree to
clipboard. Copy
Pastes the item from clipboard into the
new location. Paste
Deletes the selected item from the tree. Delete
274 | Chapter 13 Animate Objects