Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, User Manual, Page: 240 / 472

When you add a link, you can assign a user-defined category, hyperlinks category, or tag category to it. The rest
of the categories are automatically assigned by Autodesk Navisworks when it generates correponding links.
Display Links
You can switch links in the Scene Area on and off. You can also toggle the display of each of the link categories.
When links are switched on, you can reduce the screen clutter by restricting a number of links can be shown in
the Scene Area, hiding colliding icons, and using culling. Finally, as some standard link categories can have
comments associated with them, you can choose to only draw links with attached comments.
To toggle the display of links
■ Click Hyperlinks on the Workspace toolbar.
Menu: Tools
➤
Hyperlinks
To control the display of standard links
1 Click Tools
➤
Global Options.
2 In the Options Editor, expand the Interface node, expand the Hyperlinks node, and click the Standard
Categories option.
3 On the Standard Categories page, select the Visible check box to display the corresponding link category.
Clearing the check box hides the corresponding link category in the Scene Area.
By default, all standard link categories are visible.
4 Click OK.
To control the display of user-defined links
1 Click Tools
➤
Global Options.
2 In the Options Editor, expand the Interface node, expand the Hyperlinks node, and click the User-Defined
Categories option.
3 On the User-Defined Categories page, select the Visible check box to display the corresponding link category.
Clearing the check box hides the corresponding link category in the Scene Area.
By default, all user-defined link categories are visible.
NOTE If no user-defined categories have been added, this page is empty.
4 Click OK.
To reduce the screen clutter
1 Click Tools
➤
Global Options.
2 In the Options Editor, expand the Interface node, and click the Hyperlinks option.
3 On the Hyperlinks page, enter the number of links into the Max Icons box. By default, up to 25 links can
be visible.
4 To hide links that appear overlapped in the Scene Area, select the Hide Colliding Icons check box.
5 In the Cull Radius box enter the desired value. Only the links located within the specified distance from
the camera are drawn in the Scene Area. The default value of 0 means that all links are drawn.
6 Click OK.
228 | Chapter 8 Review Your Model