Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, User Manual

Page: 112 / 472

■ Colors
■ Planes
■
Parametric spline, ruled, B-spline, offset, bounded, trimmed and plane surfaces and surfaces of revolution.
■ Tabulated cylinders
■ Solids and manifold solids
■ Shells
■
Faces
Unsupported Entities
■ Points
■ Lines
■
Circular or conic arcs
■ Composite, parametric spline, B-spline, or offset curves
■ Boundaries
■ Attributes
See also:
■ “ IGES File Reader Options ” on page 425
Inventor File Reader
The file reader supports IPT (part), IAM (assembly) and IPJ (project) file formats. IDW (drawing) file format cannot
be read.
The reader supports files from Autodesk Inventor 2010
™
and earlier. Later versions should also work, but haven't
been tested. Autodesk Inventor 5
™
(or higher) or Autodesk Inventor Design Tracking 5
™
(or higher) must be
installed. Autodesk Inventor Design Tracking
™
can be downloaded from http://support.autodesk.com.
See also:
■ “ Inventor File Reader Options ” on page 425
JTOpen File Reader
The file reader supports 3D JT data format developed by Siemens PLM Software (formerly UGS Corp.).
Supported Entities
■ Tri-strip set shape
■ Polyline set shape
■ Box primitive shape
■ Cylinder primitive shape
■ Sphere primitive shape
■ Models with vertex-based color and normal
■ General JT B-Rep
100 | Chapter 5 Work with Files