Autodesk 507B1-90A211-1301 - NavisWorks Manage 2010, User Manual

Page: 140 / 472

Description Mode
Look Around. Enables you to look around
the model from the current camera posi-
tion and gives the effect that you are
moving your head around.
Zoom. Enables you to zoom into and out
of the model. Cursor up zooms in and
cursor down zooms out.
Zoom to a Box. Enables you to drag a box
so that the contents of the box fill the view.
Pan. Enables you to pan the model rather
than the camera.
Orbit. Enables you to orbit the camera
around the model, ensuring that “up” is
always “up”. The camera always orbits
around the focal point of the model.
Examine. Enables you to rotate the model
about.
Fly. Enables you to fly around the model
like in a flight simulator.
Turntable. Enables you to spin the model
around the up vector. This navigation
mode behaves as though the model is sit-
ting on a turntable, ensuring that “up” is
always “up”.
Walk Mode
In walk mode, you can navigate through a model as if you were walking through it. In this mode, the up direction
is always maintained.
Once you start walk mode, the cursor changes to the walk cursor. To walk through the model, you drag in the
direction in which you want to move in.
To use walk mode to move through the model
1 Click Walk on the Navigation Mode toolbar.
2 To move, hold down the left mouse button as you drag in the direction you want to walk, or use the cursor
keys. The camera spins left and right, and moves forwards and backwards.
NOTE Holding down the SHIFT key speeds up this movement.
128 | Chapter 6 Explore Your Model