Mitsubishi Electric MELSEC-L Series, Руководство пользователя

Страница: 322 / 1040

5 - 182
Chapter 5 Data Used for Positioning Control
Setting item Setting details
Cd.35
Step valid flag

This data item validates or invalidates step operations.
Fetch cycle: At start
Cd.36
Step start information

To continue the step operation when the step function is used, set "1" in the data
item.
Fetch cycle: 14.2[ms]
Cd.37
Skip command

To skip the current positioning operation, set "1" in this data item.
Fetch cycle: Operation cycle (During positioning operation)
Cd.38
Teaching data selection

This data item specifies the teaching result write destination.

Data are cleared to zero when the teaching ends.
Fetch cycle: At operation request
Cd.39
Teaching positioning data No.

This data item specifies data to be produced by teaching.

If a value between 1 and 600 is set, a teaching operation is done.

The value is cleared to "0" when the Simple Motion module is initialized, when a
teaching operation completes, and when an illegal value (601 or higher) is
entered.
Fetch cycle: 103[ms]