![background image](http://html.mh-extra.com/html/mitsubishi-electric/melsec-l-series/melsec-l-series_user-manual_238757669.webp)
12 - 13
Chapter 12 Expansion Control
[2] Switching of control mode (Continuous operation to torque control)
Switching method of control mode
To switch the control mode to the continuous operation to torque control mode, set
"1" in "
Cd.138
Control mode switching request
" after setting the control mode to
switch to
"
Cd.139
Control mode setting
" (30: Continuous operation to torque control
mode) from position control mode or speed control mode.
The selected control mode can be checked in "
Md.26
Axis operation status
".
When the switching condition is satisfied at control mode switching request, "1:
Position control mode - continuous operation to torque control mode, speed
control mode - continuous operation to torque control mode switching" is set in
"
Md.124
Control mode switching status
", and the BUSY signal turns ON.
The following shows the switching condition of the continuous operation to torque
control mode.
Speed control mode
2)
1)
Position control mode
Continuous operation
to torque control mode
4)
3)
Continuous operation
to torque control mode
6)
5)
Torque control mode
Continuous operation
to torque control mode
Switching operation
Switching condition
1)
Position control mode
Continuous operation to torque control mode
Not during positioning
(Note-1)
or during following
positioning/synchronous mode
• ABS1 : 1-axis linear control (ABS)
• INC1 : 1-axis linear control (INC)
• FEED1 : 1-axis fixed-feed control
• VF1
: 1-axis speed control (Forward)
• VR1
: 1-axis speed control (Reverse)
• VPF : Speed-position switching control (Forward)
• VPR : Speed-position switching control (Reverse)
• PVF : Position-speed switching control (Forward)
• PVR : Position-speed switching control (Reverse)
• Synchronous control
2)
Continuous operation to torque control mode
Position control mode
During motor stop
(Note-2)
3)
Speed control mode
Continuous operation to torque control mode
None
4)
Continuous operation to torque control mode
Speed control mode
5)
Torque control mode
Continuous operation to torque control mode
Switching is impossible.
6)
Continuous operation to torque control mode
Torque control mode
(Note-1): BUSY signal is OFF.
(Note-2): ZERO speed (Low-order buffer memory address: b3 of "
Md.108
Servo status
"
)
is ON. Change the setting of
"Condition selection at mode switching (b12 to b15)" in "
Pr.90
Operation setting for speed-torque control mode
"
when switching the control mode without waiting for the servomotor to stop. Note that it may cause
vibration or impact at control switching. (Refer to Section 5.2.4 "Detailed parameters 2".)
Buffer memory address (Low-order)
LD77MS2/LD77MS4
LD77MS16
Md.108
Servo status
: b3
876+100n 2476+100n
n: Axis No.-1
Содержание MELSEC-L Series
